ECX Circuit Instruction Manual download pdf (Page 6)

CHANGING THE TRAVEL ADJUST SETTINGS

TRANSMITTER CONTROLS

BATTERY LEVEL

INDICATOR

Solid Green: Battery

voltage is good (above

4V).

Flashing Green: Battery

voltage is critically low

(below 4V). Replace

batteries.

TH TRIM

Adjusts the neutral point

of the electronic speed

control.

ST TRIM

Adjust to make the vehicle

drive straight with no input

at the steering wheel.

POWER SWITCH

Power on

or off the

transmitter.

STEERING WHEEL

Control steering. Right and

Left steering with ST. REV

Switch on N

(see ST. REV switch).

THROTTLE TRIGGER

Controls power to motor for forward

or reverse (see TH. REV switch).

Stop

Reverse

(when TH.

REV switch

on N).

Forward

(when TH.

REV switch on N).

ST RATE

Adjusts the amount the

front wheels move when the

steering wheel is turned left

or right.

REVERSE SWITCH

Allows you to change the

direction of steering (ST. REV)

and throttle (TH. REV) controls

(default settings are “N” for

steering and “R” for throttle).

The travel function supports precise endpoint adjustments in

each direction for the steering and throttle channels.

1. Hold the trigger in the full brake position while powering

on the transmitter. The LED flashes rapidly, indicating the

programming mode is active.

2. Throttle End Point: Hold the trigger in the full throttle position.

Turn the TH TRIM knob to adjust the full throttle end point.

3.BrakeEndPoint:Holdthetriggerinthefullbrakeposition.

Turn the TH TRIM knob to adjust the full brake end point.

Return the trigger to the center position.

4. Left Steering End Point: Hold the steering wheel in the full left

position. Turn the ST TRIM knob to adjust the left end point.

5. Right Steering End Point: Hold the steering wheel in the full

right position. Turn the ST TRIM knob to adjust the right end

point. Return the steering wheel to the center position.

6. Power off the transmitter to save the travel adjust settings.

TheminimumTravelis75%,andtheMaximumtravelis

150%. The default travel settings are 125% steering and

100% throttle.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

ECX Circuit Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Remote controlled toys ECX Circuit